Ciao, it’s Wakaba! 🌸 Long time no see, everyone! 🌈

With spring season rolling in, I’ve been a tad sleepy – no, no, I mean, super busy, so I’ii go with full energy again! 🎉

Did you catch the SHINKO FES portal update in April? Morio and I are enjoying cherry blossom viewing. It isn’t a date, though. Morio caught a red-snapper in the FES pond, so we are toasting with it as our snack.

By the way, have you all been checking out our YouTube channel? It’s packed with fresh and useful info, so if you haven’t yet, please go take a look and don’t forget to subscribe! ✨ With that said, let’s dive into our YouTube channel’s March access rank. It’s quite interesting. I’ve linked the titles, so go check them out ♪

🏆 1st Place: Numalliance Robomac 210 e-Motion
This video tops the chart! It’s from a French bender machine maker we represent in Japan (If you are not in Japan, please contact Numualliance directly or your local agent). A tad sad it’s not our video, but you can check out the real R210 e-Motion machine at the Chiryu Center, so please come see!

🌟 2nd Place: CG40B Tilt Cutting
A unique cutting method from diagonally above the front – less burr, longer life for arbor (mandrill). Isn’t that neat?

🚀 3rd Place: NFA60 Thick Wire W-Torsion Spring with Small Connection Part
It’s rare to find multifunctional thick wire torsion machines. The technique to precisely process these small connectors is seriously smart!

🔧 4th Place: CG60 Cutting without arbor (Mnadrill) for Small Index Compression Spring
Another cutting technique. Wedging from below and folding from above to finish with less burr – that’s skillful!

🌈 5th Place: NF40 Copper Flat Wire Bending Test
Just a sneak peek of copper wire processing test, but so happy it got a lot of views! Copper wire is definitely a hot topic!

💪 6th Place: NF40 Double Torsion Spring with Hooks from Coil Insides
That’s our torsion machine tech! The bending unit moves significantly in the horizontal (X) direction, allowing complex connector part to be processed later.

👍 7th Place: TF35S Deep V-Hook
The processing shines with the three-axis torsion attachment. Combining lateral and downward movements swiftly! It’s quick and might be hard to catch, but give it a close look.

🔄 8th Place: TF35S Servo-controlled Back-and-forth movement of Coiling Point
Can you see how the bending tool’s position subtly shifts back and forth between the hook and body? Tension spring’s initial tension is crucial, making this feature very important. The TF series has made this movement servo-controlled, making it easier to use!

🌀 9th Place: UF40 Double Coiling
Coiling both inside and outside with right and left units. The slow-motion from 1:22 is clearer, though sorry, the picture quality isn’t the best.

🌟 10th Place: TF German Hook
The German U-hook, the very basics of tension spring processing. The TF series really stands out in tension spring machines. Thanks for the steadfast interest!

Hope you find something inspiring. Can’t wait to see what next month’s ranking brings. Stay tuned!!

※#This blog is made by generative AI from original text.