MG-100
● Compression Springs 6.0〜10.0mm / .236“〜.393“
Versatile coiling functions with 3D torsion attachment
Versatile coiling machine for max. 10mm wire also for 2D torsion springs
- ・Valuable coiling fnctions
- ・Versatility to make 2D torsion springs or to cut wire with straight end
- ・Machine structure to reduce setting time
SPECIFICATIONS
| Model | MG-100 |
|---|---|
| Wire Diameter | 6.0mm〜10.0mm .236”〜.393” |
| Max Feeding Speed | 60m/min |
| Servo Axis |
①Wire Feed ②Upper cutter (right hand coiling) ③Lower cutter (left hand coiling) ④Upper pitch (right hand coiling) ⑤Lower pitch (left hand coiling) ⑥Center coiling slide ⑦Upper coiling slide (right hand coiling) ⑧Lower coiling slide (left hand coiling) ⑨Upper cutter and arbor box up and down ⑩Lower cutter and arbor box up and down ⑪Upper coiling point back and forth ⑫Lower coiling point back and forth ⑬Center coiling point back and forth ⑭Center coiling slide torsion attachment ⑮Autoline |
| Weight | 9,500kg / 21,111lb. |
| Dimensions |
|
※Specifications can be changed without notice.
FEATURES
Unique and versatile coiling machine also for 2D torsion springs with precise & durable structure and easy operability
Versatile coiling functions
- ・By using 3 slides for right and left coiling, the proper tool positions are maintained against changes in diameter.
- ・The coiling pins can move forward and backward that contributes to highly precise shapes of seats and pitches
- ・Retractable arbor for easy operation for tapered springs and hourglass-shaped springs
- ・No burr cutting by torsion cutting with the upper and lower cutting slides.
- ・Dispersed wire pressure with six pairs of feed rollers
Versatility to make 2D torsion springs or to cut wire with straight end
- ・Vertical swing of center coiling slide that make remaining straight wire and bending wire possible.
- ・Indivisually controlled retractable upper and lower cutter & arbor units to make tapered springs or to cut wire with straight end.
Structure to save setting time
Setting time is important to small rot prioduction.MG-100 contributes to setting time reduction with the functions below.
- ・Easy positioning of each unit with 15-axis structure
- ・Autoline automatically adjusts feed roller position from 7 grooves.
(No necessity to change feed rollers)
